Our Products
Tuneable White Encoder
Tuneable White Decoder
SPS801 Smart Power Source
System Configuration
Status LED
Serial Control Port
Sensor Port
Output Port
Lighting
8 X 100W Independent and isolated AC/DC LED Drivers
Active power Factor Correction
Flicker Free Dimming
Up to 1.8A DC in each port
32-57V output voltage(34-47V Recommended LED load )
Note: Output power will be clamped by the used LED voltage
Interface
8 x RJ45 LED ports
2 x RJ45 Serial Control Ports(Loop in and loop Out)
2X RJ45 Sensor Port(Loop in and loop Out)
Cascading up to 16 SPS Units
Cascading up to 16 sensor nodes
Controller
Configurable startup port current
Configurable connected LED load current
Configurable Encoder logic (CCT, RGBW, etc)
Inbuilt RTC with replaceable Battery
Independent Schuller for intensity and CCT for each port
Open-Source RS232 Serial Control (Contact Sales for Protocol Document)
TCP/IP control via SPS IP bridge (Raspberry pi OS)
Environmental
Wide Temperature range 0-45 ⁰C
Power controlled Variable Speed Fan
Mounting
Fits into 1RU of 19inch Rack
Celling mounting brackets available(Contact for separate accessories)
SPS- Technical Parameter
Tuneable White Encoder
Application: Mood Lighting, Human Centric Lighting, Circadian Rhythm Emulation
System Configuration
TWE116 is 16 Port Encoder which receives 16 inputs through it 16 numbers RJ45 connector and encoded outputs are given back to its output LED ports for end point Decodes like CCTD-1 to render the required CCT value at the luminary level. It has its own Real Time Clock and scheduler which can be configured to work independently or interface its serial port to the Master controller to act in the Slave mode.
Electrical Specifications
Embedded Function
Mechanical Dimensions
Tuneable White Decoder
Application: Mood Lighting, Human Centric Lighting, Circadian Rhythm Emulation
System Configuration
CCTD-1 receives both dc power and CCT control signal from CCTE-Version 1 compatible encoders through CAT5 cable at the designated input. It decodes the control signal and provides equivalent current ration of warm and cool LED bank of the Luminary connected at the output port through a CAT5 cable connection. Multiple Decoders can be placed in loop in loop out manner to control multiple LED luminaries on a signal port of the power sourcing unit like lighting PoE controller.
Electrical Specifications:
Mechanical Dimensions
Circadian Rhythm
Your circadian rhythm is your sleep-wake pattern over the course of a 24-hour day. It helps control your daily schedule for sleep and wakefulness.
Awareness and Sleep Cycles
Nature control the Human Awareness cycle by the color of sunlight which makes human most effective at the middle of the day. Extending long hours in higher kelvin lights till late evening cause sleep disorder and poor awareness in the following day.
LIGHTING AUTOMATION SYSTEM
Elevating Spaces, Elevating Lives
SPS8 - Light Automation Hub
640W Lighting Automation in 1RU size
Integrated AC to DC SMPS
Integrated power and controls over single CAT5 cable
8 Numbers of RJ45 ports of 80W each
255 Device address on each port
16 Channels in each Device
255 Hub and Multiple Controllers in single Series Loop
Multiple Controllers and Gateway Support
Compatible Decoder
5 channel RGB/RGBW/RGBCW
16 channel General Purpose Decoder
Touch Screen Controlle
Inbuilt Real Time Clock
Scheduler for Circadian Rhythm
Preset CCT mode
Gateway
Tuneable White Decoder
Circadian Rhythm
Awareness and Sleep Cycles
Improve Workforce Efficiency by Scheduled Lighting
HIGH RESOLUTION MULTI-CHANNEL DECODER
10 Channel LED Decoder
Dual Thermal Sensor Inputs
RJ45 Loop In, Loop Out(Power + Controls)
10 Bit Colour Depth
1024 Steps in each colour
1Giga Colour RGB Mix
5 Channel LED Decoder
RJ45 Loop In, Loop Out (Power + Controls)
10 Bit Colour Depth
1024 Steps in each colour
1Giga colour RGB Mix
Thermal Sensor Input from LED Fixture
RGBCW Touch Screen Controller
5 Slider Controls
4 Dynamic Switches
Customizable UI